Tag Archives: charcoal

Dragon’s Blood Soap

For this I used a half mold silicone container and a clothes hangar. The colorant is activated charcoal and brick red oxide. I split the batter 60% charcoal/40% brick red oxide. Pouring most of the charcoal batter into the mold at a thin trace I then dropped in the red from various heights. Then I took the hangar and I did an up and down pattern through the soap all the way down to touch the bottom and up and out of the soap. Do this across the entire loaf, very close but not over lapping. then turn the mold to the side and do the same thing again. I did not do a fancy top here, The batter was still pretty thin so I filled some rounds with the rest. I made this as a split batch of soap.  I like to make only 4-6 bars of any one kind of soap so the half loaf mold is perfect. I make enough for a full loaf and then create two different small batches of soap at once.

 

 

 

Advertisements

Charcoal & Rose Clay Soap

I am hoping I get white suds, it’s easy to over do the charcoal and end up with grey bubbles. I cut them a little early, I could have waited another 12 hours but was impatient and there’s still some soda ash to clean up later. I scented it with Tea Tree Essential Oil.

I made the small soap hearts for a future project… lots of soda ash there.

 

Rose Soap and Tea Tree Kaolin Clay Cold Process Soap

Leave it to me to use a difficult sample scent for my first batch of cold process soap. Here is my rose scented soap. It was going to have some red swirls but there was no time. I also was learning how big of a recipe I needed for the mold I have. Recipe was a little small, not so pretty but it smells nice.

1915416_919920844764095_2165823657448067266_n

For my second batch things went a little more like I had planned. I ended up with the correct amount, the color, look and scent that I wanted and only a bit of soda ash to clean up. I was able to do the design I wanted.